Welcome to Sharetop Technology Co.,ltd.
Hotline：+86-0755-27524036
XYT-PMFWDM-T1550 R1310/1490
【NO.】PMFWDM-T15R1349-26Nv07
滤玻片型PMFWDM保偏光纤波分复用器（T1550R1310/1490）
1x2 | |||
透射端口 | 透射波长（nm） | 1550 | |
带宽范围（nm） | ±15 | ||
插入损耗(dB) | ≤0.7 | ||
隔离度(dB) | ≥30 | ||
反射端口 | 反射波长（nm） | 1310 | 1490 |
带宽范围（nm） | ±40 | ±10 | |
插入损耗(dB) | ≤0.5 | ||
隔离度(dB) | ≥13 | ||
回波损耗(dB) | 50 | ||
消光比(dB) | 18 | ||
工作模式 | 慢轴工作，快轴截止或其它 | ||
承受功率（W） | 0.5/1/5 | ||
接头类型 | FC/APC 或 定制 | ||
光纤类型 | PM1310或PM1550 | ||
光纤长度（m） | 1米 或 定制 | ||
封装尺寸（mm） | 34 x Ø5.5 | ||
工作温度（℃） | -5~+70 | ||
储存温度（℃） | -40~+85 | ||
最大拉力（N） | ≤5 | ||
*规格为不带连接器，测试数据指标25℃。
*对于带连接器的设备，IL高0.3dB，RL低5dB，ER低2dB。key键对准慢轴。
*对于不同功率参数，产品采用封装尺寸不同。
封装结构图
订购信息： | ||||
PMFWDM=滤玻片型保偏光纤波分复用器 | XYT-PMFWDM-A-B-C-D-E-F-G-H | |||
A=结构 | 1X2=1X2 | …… | ||
B=工作模式 | F=慢轴工作，快轴截止 | S=快轴工作，慢轴截止 | B=双轴工作 | SS=可定制 |
C=工作波长 | T15R1349=透射1550，反射1310/1490 | |||
D=光纤类型 | P13=PM1310 | P15=PM1550 | SS=可定制 | |
E=套管类型 | 0.25=250μm | 0.9=900μm | …… | SS=可定制 |
F=光纤长度 | 1M=1米 | 2M=2米 | …… | SS=可定制 |
G=接头类型 | FA=FC/APC | SA=SC/APC | N=不含头 | SS=定制 |
类型 | PM1300-XP | PM1550-XP |
工作波长 | 1270 – 1625 nm | 1440 – 1625 nm |
数值孔径 | 0.120 | 0.125 |
模场直径（Gaussian） | 9.3 ± 0.5 µm @ 1300 nm | 10.1 ± 0.4 µm @ 1550 nm |
截止波长 | 1210 ± 60 nm | 1380 ± 60 nm |
损耗衰减 | ≤ 1.0 dB/km @ 1300 nm | ≤ 1.0 dB/km @ 1550 nm |
拍频长度（标称） | ≤ 4 mm @ 1300 nm | ≤ 5.0 mm @ 1550 nm |
归一化交叉串扰 | ≤ - 40.0 dB at 4 m @ 1300 nm | ≤ - 40.0 dB at 4 m @ 1550 nm |
双折射 | ≤ - 30.0 dB at 100 m @ 1300 nm | ≤ - 30.0 dB at 100 m @ 1550 nm |
包层直径 | 125.0 ± 1.0 µm | 125.0 ± 1.0 µm |
芯径 | 8.0 µm | 8.5 µm |
涂覆层直径 | 245.0 ± 15.0 µm | 245.0 ± 15.0 µm |
包层/涂覆层偏差 | < 5.0 µm | < 5.0 µm |
纤芯/包层同心度偏差 | ≤ 0.50 µm | ≤ 0.50 µm |
涂覆层材料 | Acrylate | Acrylate |
工作温度 | -40 to 85 °C | -40 to 85 °C |
强度测试的等级 | ≥ 200 kpsi (1.4 GN/m² | ≥ 200 kpsi (1.4 GN/m² |
|
Products damaged due to human or non-use of other causes of improper,we promises one year warranty and lifetime maintenance,but the unauthorized disassembly equipment caused damage is not covered under warranty and returned within range. |
|
Under normal use,if there are product quality problems,or not work normally,we provide free repair or replacement service within one year;Within three years more than one year,we provide to collect the material cost,maintenance free. Repair warranty period of three years from the freight borne by each of the parties.After three years of warranty,the material cost,maintenance,freight(refers to the product of the two-way shipping to and from)shall be borne by the user. |
|
We promise that the product we provide can meet the performance requirements of users , and it is supplied by the user's sample request. |
